How to Print Successfully Using the ABS 3D Printer Filament

Posted by on

ABS is one of the most commonly utilized thermoplastics in 3D printing. It’s really sturdy that makes it an amazing option for both industrial and personal utilization. The prints are flexible to daily tear and wear and thereby you might find it in electronic cases, car bumpers, etc.

To apply your finishing touches, ABS is really user-friendly. Not just does its resistance act as a factor here but also the fact that it dissolves in acetone so it can be smoothed chemically for hiding layer lines on the print. ABS 3D printer filament enables the production of elegant ultimate designs which feel and look whole. Nevertheless, if you are not accustomed to printing with ABS you might find it tough to use at first. To be completely ready, you will require taking some actions before starting to print.

Don’t forget to warm up

This is an essential task to start with. You need to find the best possible temperature settings. They might differ for different users working on various 3D printers but usually, 220-250 degrees Celsius are the most fundamental temperature presets. Setting the bed temperature is also required and it’s also best for ensuring the printer has a warm build plate. Usually, the ultimate temperature is pondered to be 110 degrees Celsius but you might try to check it out on different machines prior to doing a heavy printing. While printing the first layer, ABS needs something for binding itself to.

Anchor the prints

To make more successful printings amid the first layer printing, you might utilize rafts and brims, particularly if you determined for printing thin or big parts, which might have trouble precisely keeping the bed. Brims would act as the anchor for the first layer and stop warping by including different plastic rings around the model, making an additional surface area for holding down the model’s edges. If you use more lines, it would stick to the bed surface more. Besides, rafts will print a completely new plastic structure below the print, which will assist difficult designs and one that can be erased after the finishing of the print.

Maintain a clean ambiance

Remember to heat the nozzle first while changing a 3D printer filament prior to trying to take the material out. Else, if the filament cools inside the nozzle, it can make a plug that you will need to clean. However, a clogged extruder is a common thing to 3D printer users and you must not be shocked if it happens to you. This is the result of daily printer exploitation.


ABS 3D printer filament is famous with Meltlink 3D for a good reason. It is easier to process and products printed with this plastic filament are flexible to aging. This is why it’s an amazing choice for us. If you want to print successfully with this 3D printer filament, consider contacting us at Meltlink 3D. We will be happy to serve you.

ABS 3D printer filament

← Older Post

Leave a comment

Please note, comments must be approved before they are published