MADE IN THE UNITED STATES
We are a company with over 20 years of experience in the extrusion of plastic items. We have refined our process to provide a product “Made in USA” that fulfills market demands.
This is a great, smooth-flowing, lower-temperature PLA with a fine surface finish that can be extruded at high rates. It does have a relatively long cooling time, so a healthy amount of print cooling airflow is recommended.
This has been the best abs I have worked with. It has a very vibrant color and when printed at higher Temps it gives a shine. Does not seem to have any problems with water absorption.
This green filament is on of the prettiest colors i have printed with, the quality of my print was one of the best with very minimal cleaning and once cleaned it was a perfect print. everything comes out smooth and very smooth color all over the print. Definitely do recommend this filament.
This Black filament is the best black i have printed with. The first print on black was so smooth all around perfect black all over with no discoloring. also this filament does stick together very well without having to mess with the temperatures of the printer. almost all my prints printed without raft . Definitely recommend this filament to whoever is looking to print perfect smooth models.
THE BEST ABS 3 years PRINTING WITH THIS MATERIAL ABS MELTINK SPECIAL
There are many filaments on the market that purport to be “gold”, but most turn out to be more or less brown or yellow, regardless of how golden they’re made to look in photos. Meltink’s Gold PLA is the most truly golden-looking filament I’ve ever used, and it printed perfectly for me at 215ºC on the Zortrax M200 with Z-Temp. I recommend using a lot of fan (I used 100% with a dual-fan modification) with this material to improve the ease of support removal and print definition.
Meltink’s PLA/PHA seems to be much more tolerant of extrusion parameters than the other, better-known Dutch PLA/PHA supplier. The other brand tends to jam if the temperature is just a bit too warm or too cool or if the extrusion rate is a bit too fast or too slow. My Zortrax M200 prints its raft very slowly but its support very rapidly, so it’s a good “torture test”. Extruding at 195º C with lots of print fan worked optimally for me, and support removal was easy-peasy. It’s slightly paler with a less rich gold tone than Meltink’s Gold PLA, but still distinctly golden and a good choice where a bit of flex is needed that can’t be achieved with standard PLA.
I love the color . It’s just the right balance of glossy and provides your models a rich dense color.
This filament prints nice and with a great flow. The color is rich and dense.
Excellent silver PLA. Completely opaque with a reflective quality. Ran on default settings on my Maker Gear M2 perfectly.
We are located
in Miami, FL
Address: 8205 NW 68th Street. Miami, Florida 33166
Phone: 1 (888) 635-8970
Business Hours: Mon – Fri 9:00 am – 6:00 pm.